S.I. No. 619/2014 - European Union (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) (Amendment No. 2) Regulations 2014.


Notice of the making of this Statutory Instrument was published in

“Iris Oifigiúil” of 9th January, 2015.

I, ALAN KELLY, Minister for the Environment, Community and Local Government, in exercise of the powers conferred on me by section 3 of the European Communities Act 1972 (No. 27 of 1972) and for the purpose of giving effect to Commission Delegated Directives 2014/69/EU, 2014/70/EU, 2014/71/EU, 2014/72/EU, 2014/73/EU, 2014/74/EU, 2014/75/EU and 2014/76/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex III and Annex IV to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment hereby make the following Regulations:

Citation

1. These Regulations may be cited as the European Union (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) (Amendment No. 2) Regulations 2014.

Purpose of Regulations

2. The purposes for which these Regulations are made include the purpose of giving effect to the provisions of Commission Delegated Directives 2014/69/EU, 2014/70/EU, 2014/71/EU, 2014/72/EU, 2014/73/EU, 2014/74/EU, 2014/75/EU and 2014/76/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex III and Annex IV to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

Amendment of Definition

3. Regulation 3(1) of the European Union (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) Regulations 2012 ( S.I. No. 513 of 2012 ) is amended by substituting for the definition of “the Directive” the following:

“ “ the Directive” means European Parliament and Council Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment, as amended by Commission Delegated Directives 2012/50/EU and 2012/51/EU of 10 October 2012 and Commission Delegated Directives 2014/1/EU, 2014/2/EU, 2014/3/EU, 2014/4/EU, 2014/5/EU, 2014/6/EU, 2014/7/EU, 2014/8/EU, 2014/9/EU, 2014/10/EU, 2014/11/EU, 2014/12/EU, 2014/13/EU, 2014/14/EU, 2014/15/EU and 2014/16 /EU of 18 October 2013 and Commission Delegated Directives 2014/69/EU, 2014/70/EU, 2014/71/EU, 2014/72/EU, 2014/73/EU, 2014/74/EU, 2014/75/EU and 2014/76/EU of 13 March 2014;”.

/images/ls

GIVEN under my Official Seal,

31 December 2014.

ALAN KELLY,

Minister for the Environment, Community and Local Government.

EXPLANATORY NOTE

(This note is not part of the Instrument and does not purport to be a legal interpretation.)

These Regulations amend the European Union (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) Regulations 2012 ( S.I. No. 513 of 2012 ) in order to give effect to the provisions of the following Commission Delegated Directives:

a) Commission Delegated Directive 2014/69/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC for industrial monitoring and control instruments;

b) Commission Delegated Directive 2014/70/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in micro-channel plates (MCPs);

c) Commission Delegated Directive 2014/71/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solder in one interface of large area stacked die elements;

d) Commission Delegated Directive 2014/72/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders and termination finishes of electrical and electronic components and finishes of printed circuit boards used in ignition modules and other electrical and electronic engine control systems;

e) Commission Delegated Directive 2014/73/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in platinized platinum electrodes used for conductivity measurements;

f) Commission Delegated Directive 2014/74/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead used in other than C-press compliant pin connector systems for industrial monitoring and control instruments;

g) Commission Delegated Directive 2014/75/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for mercury in cold cathode fluorescent lamps (CCFLs) for back-lighting liquid crystal displays, not exceeding 5 mg per lamp, used in industrial monitoring and control instruments placed on the market before 22 July 2017;

h) Commission Delegated Directive 2014/76/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for Mercury in hand crafted luminous discharge tubes (HLDTs) used for signs, decorative or architectural and specialist lighting and light-artwork.